Applications
Skin rejuvenation.- Fine lines and superficial wrinkles, treated with the fine-viscosity gel.
- Deep wrinkles, treated with the medium-viscosity gel.
- High-volume facial restoration, treated with the thick-viscosity gel.
How it works
Gel Maker forms the filler by processing albumin-rich serum and heating it to a controlled temperature in dedicated chambers, producing an autologous, adjustable-viscosity injectable gel. The same device yields three distinct viscosity levels, fine, medium and thick, each on its own heating protocol, and the gel is ready to use as soon as the protocol steps are complete. Temperature and processing time are set and held through digital precision control, and the unit adds integrated cooling technology for a fast, efficient workflow between steps.
Viscosity levels
Fine, medium, thick
Fine-viscosity protocol
70°C for 7 minutes, plus a 5-minute cooling phase
Medium-viscosity protocol
80°C for 8 minutes, plus a 5-minute cooling phase
Thick-viscosity protocol
90°C for 10 minutes, plus a 5-minute cooling phase
Yield with D-MED PRP Kit
At least 5 to 6 mL of injectable filler
Temperature setting range
10-90°C, accuracy +1°C
Time setting range
0 seconds to 99 minutes 59 seconds
Preloaded programs
2
Max heating speed
Room temperature to 90°C in under 10 minutes
Max cooling speed
90°C to room temperature in under 4 minutes
Display
LED
Power
260 W, AC 110/220V, 50/60Hz
Dimensions
330 x 220 x 130 mm
Weight
4.2 kg
Operating conditions
5-40°C at 80% relative humidity
Why this system
Three viscosities, one device
Gel Maker produces autologous albumin rich plasma gel from the patient's own blood, in three viscosities.
Autologous, from the patient's own blood
The filler is autologous: derived from the patient's own blood tissue, not a donor or synthetic source.
Paired with the D-MED PRP Kit
Combined with the D-MED PRP Kit, the system yields at least 5 to 6 mL of injectable filler. D-MED states that volume delivers visible results in a single session.
Digital precision control
Temperature and processing time are set and held through digital precision control, across all three viscosity protocols.
What to know
What does Gel Maker produce?
Autologous albumin rich plasma gel, in three viscosities.
Is the gel made from donor material?
No, from the patient's own blood. No product in this portfolio uses human donor material of any kind; every regenerative system here is autologous, plant-derived or synthetic.
How many viscosity levels can Gel Maker produce?
Three: fine, medium and thick, each on its own temperature and time protocol, all on the same device.
Is the gel ready to use right away?
Yes. It is ready to use as soon as the protocol steps are complete.
Can Gel Maker be combined with the D-MED PRP Kit?
Yes. Combined with the D-MED PRP Kit, the system yields at least 5 to 6 mL of injectable filler.
DNA Nexus support
DNA Nexus will handle installation and set up the Gel Maker on site.
Gel Maker - D-MED